Use Cases

Ultra-high rigid coupling SFF model is used to connect the servo motor and the feed shaft. The rated torque is higher than the conventional models, and the coupling size and the moment of inertia can be reduced.

The high damping performance STEPFLEX coupling is used to connect the stepper motor and the ball screw.

Star flex coupling is used to connect the drive unit. The structure is simple and maintenance is easy.

STARFLEX couplings are used to connect the motor and jack together.

Electromagnetic-actuated brake 111 model is used to hold the flap of the entrance/exit gate.

PARAFLEX couplings are used in the Wire feed section. They realizing a low reaction force.

Centa flex coupling and floating shaft (high-speed rotation) are used to connect the engine and the propeller.

Centa flex couplings are used to connect the engine and the electric dynamometer.

Centa flex couplings are used to connect the engine and the pump.

ETP bushing is used to fix the feed roll. The roll and the shaft can be fixed easily and accurately, and the size in the direction of the shaft can be reduced.

ETP bushing is used to connect the mold fixing shaft and the shaft of the index feeding unit. Connection with one bolt substantially reduces the adjustment time.

ETP bushings are used to position alignment tables and alignment screws.

Stainless ETP bushing is used in a food processing machine. It can be used in sections that need to be washed or are exposed to water.

ETP-A model parts are used to secure timing pulleys in place.

ETP-A model parts are used to position complicated timing belt systems.

Posi-Lock PSL-K model parts are used to position toll bars and secure them in place.

The BXR brake is ideal in AGV applications, as the vehicle must have emergency braking capability as well as have a default brake to hold position when not in motion.

The vertically articulated robot is the BXR LE model with ultra-thin design made possible by operation with a dedicated controller. As an ultra-thin model, its brakes are mounted on the output axle, making effective use of limited space. The dedicated controller also enables energy conservation.

Newly adapted hollow shaft of the motor had larger outer diameter than previous one. The conventional brakes were unable to be passed the shaft through. So we customized a brake with an expanded inner diameter of the brake stator and rotor.

Spline type BXR is used to hold the arm. A slim design saves space and a light rotor substantially reduces wear from idling.

Spring-actuated brake BXH model for electric forklift.Compact, high torque design.

BXR models are used as retaining brakes for drive motors.

Spring-actuated brake BXW model is used to prevent a fall.

A large BXW is used in a pitch drive device of a wind power generator.

Safety standards required another brake in addition to the braked motor.
It was realized that to install the brakes and hold the ball screw (vertical axis) without sacrificing space by integrating the coupling and the SERVOFLEX SFF model of the rotor hub.

Spring-actuated brake BXW models are used as retaining brakes for valve position.

Spring-actuated brake BXW models are used as controlling for stepper motor and shaft end.

Spring-actuated brake BXW models are used as retaining brakes for antennae rotation.

Spring-actuated brake BXW models are used as retaining brakes for X and Y axis.

Spring actuated brake BXW model is used to hold the tip up/down (vertical)axis and to ensure security in the case of the belt is fractured.

Spring-actuated brake BXL models are used as retaining brakes for lifting and lowering heavy objects at the work site.
The stable brake protects the safety of work.

Spring-actuated brake BXL model in the geared motor for a multi-story car park.
Highly abrasion-resistant friction material is used for long service life.

Metal disc coupling SFC and springactuated brake BXW with silencing spring are used to transmit the power and hold the position in a diagnostic imaging system.They contribute to increasing the quietness.

A high performance, compact miniature brake 112 is used for the cleaning head of an ink jet printing machine.

Electromagnetic-actuated clutches CS Models is used for the automatic packing machine because of it's torque characteristics, excellent responsiveness, and high durability.

Spring-actuated brake 111 model is used in the elevating device for the auxiliary leg.

A cylindrical linear motor system is used in the conveyor drive unit. The JIS protection class is IP65.

A cylindrical linear motor is used in the LCD repair equipment. Speed is increased and dust is reduced.

For conveying cups containing liquid.
The speed can be fi ne-tuned diff erent from air systems, and the equipment can be easily cleaned because the JIS protection class is IP65.

Linear shaft drive can be used for conveying the rolled eggs with a conveyor.
Motorized by securing the movable element and replacing the air cylinder.

The DR-S model is used to support the oscillating motor for vibration screens.

The anti-vibration mounting ESL model is used to dampen the vibration of a large compressor.

ROSTA tensioner NSE model is used to absorb chain slack.

The tensioner RSE model is used for a bottle alignment conveyor.

The ROSTA oscillating mounting AU model is used in the vibration conveyor.
The service life is longer than that of a metal disc and coil spring.

The AB model is used for a vibration screen.