Product Information

S Models Specifications

S Models

[Specifications]

ModelOutput shaft rotation
direction*		Rated output shaft torque
［N・m］		Range of rated-load output shaft rotation speeds［min-1］Mass
［kg］
Input1430min-1Input1720min-1
E1Counterclockwise1.380～3000～3601.4
E2Clockwise1.380～3000～3601.4
JK1Counterclockwise2.880～3000～3601.9
JK2Clockwise2.880～3000～3601.9
Y1Counterclockwise6.900～3300～4004.8
Y2Clockwise6.900～3300～4004.8

* The * mark indicates the rotation direction viewed from the output shaft end.

* The rated output shaft torque value is constant across the entire range of speed change.

* A rotational speed of zero under a non-loaded condition is sometimes not achieved.

* Rated output shaft torque specifications of 11.5 N･m (QX model) are also available. Please contact Miki Pulley.

[Dimensions] E1/E2

[Dimensions] JK1/JK2

[Dimensions] Y1/Y2

Related Product

PDS Models
PDS Models
Basic Specifications
Standard applied motor output 0.2 kW to 3.7 kW （4-pole）
Speed reduction ratio Approx. 1:4
SCD Series
SCD Series
Basic Specifications
Rated output 0.2 kW to 3.7 kW
Power supply voltage Single-phase 100 or 200 V/50 Hz, 100 or 200 V/60 Hz
Speed change range 80 min.-1 to 2500 min.-1
PDG(BSN)Models
PDG(BSN)Models
Basic Specifications
Motor output 0.2 kW to 3.7 kW （4-pole）
Power supply voltage Three-phase 200 V/50 Hz, 200 V or 220 V/60 Hz
Speed reduction ratios 1/10, 1/20, 1/30, 1/40, 1/50, 1/60
PK Models （Single-type variable-pitch pulleys）
PK Models （Single-type variable-pitch pulleys）
Basic Specifications
Standard applied motor output 0.4 kW to 11 kW (4-pole), 11 kW to 18.5 kW (6-pole)
Speed change ratio Approx. 1:3
Outer diameter of pulley 150 mm to 400 mm