Product Information

Features of SCD Series

These power supplies can use ordinary 100 V AC or 200 V AC current at either 50 Hz or 60 Hz. Select any speed using the speed setter on the control panel.This is a high-performance series that can use feedback control when a tachometer generator is installed on the motor.

Related Product

P Models （single-type variable-pitch pulleys）
P Models （single-type variable-pitch pulleys）
Basic Specifications
Standard applied motor output 0.2 kW to 3.7 kW （4-pole）
Speed change ratio Approx. 1:1.5
Outer diameter of pulley 86 mm to 218 mm
AHM Models
AHM Models
Basic Specifications
Motor output 0.2 kW to 3.7 kW （4-pole）
Power supply voltage Three-phase 200 V/50 Hz, 200 V or 220 V/60 Hz
CB torque 5.5 N･m to 90 N･m
AHS Models
AHS Models
Basic Specifications
Standard applied motor output 0.2 kW to 3.7 kW （4-pole）
Speed reduction ratio 1:04
CB torque 5.5 N･m to 90 N･m
AP Models （single-type variable-pitch pulleys）
AP Models （single-type variable-pitch pulleys）
Basic Specifications
Standard applied motor output 0.2 kW to 1.5 kW （4-pole）
Speed change ratio Approx. 1:2
Outer diameter of pulley 86 mm to 164 mm