AXP Models

ダウンロード

Features of AXP Models

These models add a belt-type stepless speed changer to an AXM solid-shaft geared motor. They are about 20% lighter and smaller than our previous belt-type stepless speed changer (0.4-kW model).They can also operate at high torque while at low speeds (compared to the 0.4-kW model), not a traditional strength of inverters.

AXP Models Specifications

AXP

[Specifications1]

Model	Motor output[kW]	Poles	Power supply Voltage[V]/Frequency[Hz]	Speed reducer frame number	Speed reduction ratio						Mass[kg]
Model	Motor output[kW]	Poles	Power supply Voltage[V]/Frequency[Hz]	Speed reducer frame number	10	20	30	40	50	60	Mass[kg]
AXP-02-□-50N-□-□-IE1	0.2	4	3-phase 200/50、200・220/60	50	1/10	1/20	1/30	1/40	1/50	1/60	15
AXP-04-□-60N-□-□-IE1	0.4	4	3-phase 200/50、200・220/60	60	1/10	1/20	1/30	1/40	1/50	1/60	26
AXP-07-□-70N-□-□-IE3	0.75	4	3-phase 200/50、200・220/60	70	1/10	1/20	1/30	1/40	1/50	1/60	36
AXP-15-□-80N-□-□-IE3	1.5	4	3-phase 200/50、200・220/60	80	1/10	1/20	1/30	1/40	1/50	1/60	52

[Specifications2]

Model	Voltage[V]	Output shaft revolution speed[min^-1] and output shaft torque[N･m] in each deceleration ratio
	Voltage[V]	1/10	1/20	1/30	1/40	1/50	1/60
	50	50～200	25～100	17～68	12.5～50	10～40	8.5～34
	60	60～240	30～120	20～80	15～60	12～48	10～40
AXP-02-□-50N-□-□-IE1	50	14～7	22～12	31～17	34～19	41～24	45～27
AXP-02-□-50N-□-□-IE1	60	13～5	22～9	30～13	33～15	40～18	44～20
AXP-04-□-60N-□-□-IE1	50	28～13	49～24	65～33	77～41	84～47	96～54
AXP-04-□-60N-□-□-IE1	60	25～11	44～20	59～27	71～33	78～38	89～44
AXP-07-□-70N-□-□-IE3	50	53～25	95～46	123～63	155～81	151～87	151～102
AXP-07-□-70N-□-□-IE3	60	48～20	87～37	113～50	143～65	145～70	144～82
AXP-15-□-80N-□-□-IE3	50	106～51	187～94	250～131	263～164	252～166	215～143
AXP-15-□-80N-□-□-IE3	60	96～41	170～76	228～106	251～132	242～159	204～143

※Output shaft revolution speed and output shaft torque values calculated at a 200V/50･60Hz rated value load. However, there are instances when output shaft torque is limited by the reducer tolerance.

[Dimensions]

Unit[mm]

Model	Dimensions of part																						Dimensions of shaft
Model	A	B1	B2	C	E	F1	F2	G	G1	H	H1	HB	HC	KL	L1	L2	L3	M	P	R	X	Z	Q	QK	S	U	W
AXP-02-□-50N-□-□-IE1	142	124	100	118	16	50	80	115	35	363	301	195.5	328	118	423	311	28	115	45	27	131	10	40	35	17	19	5
AXP-04-□-60N-□-□-IE1	165	143	115	140	15.5	60	90	127	37	395	339	218	355	118	468	337.5	28	136	52.5	27	131	12	50	45	22	24.5	6
AXP-07-□-70N-□-□-IE3	190	160	130	160	4.5	70	105	156	45	460	407	259	414.5	128.5	541.5	390.5	41	168	65	37	162	14	60	55	28	31	8
AXP-15-□-80N-□-□-IE3	220	170	140	190	-6.5	80	112	176	60	509	458	292	457	141	618.5	450.5	41	200	70	37	187	14	65	60	32	35	10