RWM Models

ダウンロード

Features of RWM Models

These are hollow-shaft geared motors for motor outputs of 0.2 kW to 1.5 kW (4-pole).They use hollow-shaft speed reducers and do not require transmission components such as couplings, chains, or sprockets, so virtually nothing rotating is exposed to the outside, and high safety is assured without use of a safety cover. And since special long-life oil is used in the speed reducer, oil changes are unnecessary. The sealed construction also allows flexibility in mounting on top, bottom, left or right.

RWM Models Specifications

RWM

[Specifications1]

Model	Motor output[kW]	Poles	Power supply Voltage[V]/Frequency[Hz]	Speed reducer frame number	Speed reduction ratio						Mass[kg]
Model	Motor output[kW]	Poles	Power supply Voltage[V]/Frequency[Hz]	Speed reducer frame number	10	20	30	40	50	60	Mass[kg]
RWM-02-40-□-IE1	0.2	4	3-phase 200/50、200･220/60	40	1/10	1/20	1/30	1/40	1/50	1/60	8.8
RWM-04-50-□-IE1	0.4	4	3-phase 200/50、200･220/60	50	1/10	1/20	1/30	1/40	1/50	1/60	12
RWM-07-63N-□-IE3	0.75	4	3-phase 200/50、200･220/60	63N	1/10	1/20	1/30	1/40	1/50	1/60	23.2
RWM-15-75N-□-IE3	1.5	4	3-phase 200/50、200･220/60	75N	1/10	1/20	1/30	1/40	1/50	1/60	33

※Totally enclosed fan cooled motors in conformance with JIS C 4210 for 0.2kW･0.4kW motors, and JIS C 4213 for motors over 0.75 kW.

[Specifications2]

Model	Frequency[Hz]	Output shaft revolution speed[min^-1] and output shaft torque[N･m] in each deceleration ratio
		1/10		1/20		1/30		1/40		1/50		1/60
		speed	torque	speed	torque	speed	torque	speed	torque	speed	torque	speed	torque
RWM-02-40-□-IE1	50	143	11.6	71.5	21.2	47.7	28.6	35.8	35.4	28.6	39	23.8	36
RWM-02-40-□-IE1	60	171.5	9.6	85.8	17.7	57.2	23.8	42.9	29.5	34.3	35.2	28.6	36
RWM-04-50-□-IE1	50	142.5	23.5	71.3	43.2	47.5	59	35.6	73.2	28.5	73	23.8	68
RWM-04-50-□-IE1	60	171	19.6	85.5	36	57	49.2	42.8	61	34.2	73	28.5	68
RWM-07-63N-□-IE3	50	144	44.7	72	83.3	48	114	36	144	28.8	135	24	130
RWM-07-63N-□-IE3	60	172.5	37.3	86.3	69.4	57.5	95.1	43.1	120	34.5	135	28.8	130
RWM-15-75N-□-IE3	50	145	94.9	72.5	179	48.3	230	36.3	220	29	210	24.2	200
RWM-15-75N-□-IE3	60	174	79.2	87	150	58	211	43.5	220	34.8	210	29	200

※Output shaft revolution speed and output shaft torque values calculated at a 200V/50･60Hz rated value load. However, there are instances when output shaft torque is limited by the reducer tolerance.

[Dimensions]

Unit[mm]

Model	Dimensions of part									Dimensions of output part
Model	A	A1	F	F1	F2	H	KL	L	X	KE	LA	LB	LE	S	B1	B2	D	U	W
RWM-02-40-□-IE1	100	50	121.5	40	50	208	118	312.5	131	4-M6-8	75	60	2.5	30	78	26	18	20.8	6
RWM-04-50-□-IE1	120	60	144	50	60	228	118	350	131	4-M8-9	85	70	2.5	40	92	30	25	28.3	8
RWM-07-63N-□-IE3	144	72	179	63	72	263.5	128.5	414.5	162	8-M8-11	95	80	3	45	112	36	25	28.3	8
RWM-15-75N-□-IE3	178	89	209	75	86	302	141	480	187	8-M8-12	115	95	3	50	120	40	28	31.3	8

※Output component tap hole KE dimensions are: quantity-screw designation-screw depth; quantity refers to the quantity on one side.

Options of RWM Models

Output Flanges F- □

Dimensions

Unit[mm]

Model	A	B	C	D	E	F	G	H	J	K	L	M	N	P	Mass[kg]
F-30	25.5	6	6	4	4	50	68	80	70	6.5	55	65	75	4-⌀6.5	0.07
F-40	30.5	7	5	4	3.5	60	87	110	95	9	60	75	87	4-⌀6.5	0.14
F-50	46.5	9	8.5	5	4	70	90	125	110	11	70	85	100	4-⌀9	0.23
F-63	29	10	─	6	6	115	150	180	142	11	80	95	110	8-⌀9	0.29
F-75	54	13	─	6	7	130	165	200	170	14	95	115	140	8-⌀9	0.65