CPU Models Specifications
CPU Models
[Specifications]
| Model | Rated torque ［N・m］ | Misalignment | Max. rotation speed ［min-1］ | Torsional stiffness ［N・m/rad］ | Moment of inertia ［kg・m2］ | Mass ［kg］ |
|---|
| Parallel ［mm］ | Angular ［°］ |
|---|
| CPU-26-A | 2.2 | 0.3 | 4 | 4000 | 600 | 3.57×10-6 | 0.04 |
|---|
| CPU-36-A | 10 | 0.4 | 4 | 3500 | 1350 | 1.64×10-5 | 0.09 |
|---|
| CPU-46-A | 25 | 0.5 | 4 | 3000 | 1650 | 5.33×10-5 | 0.19 |
|---|
*Max. rotation speed does not take into account dynamic balance.
*The moment of Inertia and mass are measured for the maximum bore diameter.
[Dimensions]
Unit ［mm］
| Model | d1, d2 | D | E | L | L1 | L2 | M | A |
|---|
| Min. | Max. |
|---|
| CPU-26-A | 6 | 12 | 26 | 0.3 | 36 | 12 | 4 | M3 | 9 |
|---|
| CPU-36-A | 8 | 18 | 36 | 0.3 | 44 | 15 | 4.75 | M4 | 13 |
|---|
| CPU-46-A | 10 | 22 | 46 | 0.3 | 54 | 18 | 6.5 | M5 | 16 |
|---|
*Insert the shaft to at least the dimension L1. (Note that the shaft cannot go all the way through.)
*The recommended processing tolerance for paired mounting shafts is the h7 class.
[Standard bore diameter]
| Model | Standard bore diameters d1, d2 ［mm］ |
|---|
| 6 | 6.35 | 7 | 8 | 9 | 9.525 | 10 | 11 | 12 | 14 | 15 | 16 | 18 | 19 | 20 | 22 |
|---|
| CPU-26-A | ● | ● | ● | ● | ● | ● | ● | ● | ● | | | | | | | |
|---|
| CPU-36-A | | | | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | | | |
|---|
| CPU-46-A | | | | | | | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● |
|---|
*Bore diameters between the minimum and maximums shown in the dimensions table are compatible, but bore diameters other than those shown in the above table require a separate bore drilling charge.
日本語
English
Deutsch
中文
한국어
