Product Information

546 Models Specifications

546 Models

[Specifications]

ModelSizeTorque [N・m]Coil (at 20℃)Heat resistance classAllowable rotation speed of engagement [min-1]Max. rotation speed [min-1Moment of inertia J [kg・m2Number of teethArmature pull-in time ta [s]Armature release time tar [s]Bearing numberMass [kg]
Excitation voltage [V]Wattage [W]Current [A]Resistance [Ω]NFNSSawtoothRotorArmatureFull-depth tooth, fullSawtooth, full
546-12-341217.5DC2413.30.5543.4F503010015006.6×10-56.0×10-5200250.0350.04060040.5
546-13-341325DC2418.70.7831.0F503010015001.5×10-41.2×10-4220300.0400.05060050.9
546-15-341550DC2421.30.8927.1F503010015003.7×10-43.7×10-4260360.0600.06060071.5
546-21-3421100DC2427.01.1321.0F503010015008.7×10-45.2×10-4290360.0800.07060092.4
546-23-3423250DC2436.31.5115.9F503010015002.06×10-31.85×10-3280380.0900.08060113.9
546-25-3425500DC2456.62.3610.2F503010015004.88×10-34.51×10-3250400.1000.09060146.8
546-31-34311000DC2479.73.327.2F503010015001.12×10-21.28×10-2195400.1100.110601711.1
546-32-34322200DC24114.14.755.1F503010015002.87×10-22.92×10-2186400.1200.130602015.3

*The armature pull-in and release times are reference values under no load in a stationary state. They are generally longer depending on the size of the load and the operating state when engaged.

*The allowable rotation speeds of engagement NF and NS indicate, respectively, full-depth tooth/full position and full-depth tooth/single position.

[Dimensions]

Unit [mm]
ModelRadial direction dimensionsAxial direction dimensions
ABCDEFGefgHKLMNOPSUVWa
546-12-34575222.52627.23620M48.51043344.33.11.31.32.0154.550.2
546-13-346758313233.74625M58.54.51149394.93.51.41.32.516.5560.3
546-15-34827536.54244.56035M6104.51255426.14.82.21.93.518680.3
546-21-3495884652557045M8125.51463458.76.02.82.23.0206100.4
546-23-341141055562658055M8127.81869509.06.53.32.23.0246100.4
546-25-341341276872759570M12159.520836111.08.44.32.73.0268100.4
546-31-34166152809093.512085M12159.52293.56613.111.45.33.23.53110120.5
546-32-3419517595100103.5150100M121911.5241108014.011.76.33.24.038.510120.5
Unit [mm]
SizeShaft bore dimensions
d H7Models compliant with JIS standardsModels compliant with the old JIS standards
b P9t+0.50b E9t+0.50
12103-0.006-0.0311.24+0.05+0.021.5
13155-0.012-0.04225+0.05+0.022
15206-0.012-0.0422.55+0.05+0.022
258-0.015-0.05137+0.061+0.0253
21258-0.015-0.05137+0.061+0.0253
308-0.015-0.05137+0.061+0.0253
23308-0.015-0.05137+0.061+0.0253
4012-0.018-0.061310+0.061+0.0253.5
254012-0.018-0.061310+0.061+0.0253.5
5014-0.018-0.0613.512+0.075+0.0323.5
315014-0.018-0.0613.512+0.075+0.0323.5
6018-0.018-0.061415+0.075+0.0325
326018-0.018-0.061415+0.075+0.0325
7020-0.022-0.0744.518+0.075+0.0326

Related Product